Cub Cadet C-155G User Manual
Page 20
•
Using a spring puller (Part No. 732-0571)or
other suitable tool, disconnect the spring
which is attached to a small hook found on
the left, rear portion of the transmission.
See Figure 18.
•
Place the deck engagement/lift lever in the
BLADES STOP position.
•
Locate the two belt keeper pins, found on
either side of the engine pulley, and use a
1/4-inch socket wrench to remove them
from the lower frame. See Figure 19.
NOTE: When reassembling, make cer-
tain belt keeper pins are assembled in
the same locations from which they
were removed.
•
Unpile the deck belt from around the en-
gine
pulley.
Return
the
deck
engagement/lift lever to the engaged (all
the way forward) position.
•
Locate the deck anti-sway rod and adjust-
able deck links found near the front of the
cutting deck. See Figures 20 & 21.
•
First remove the hairpin clip which secures
the anti-sway rod to the front portion of the
cutting deck, then remove the hairpin clips
which secure the adjustable deck hangers.
Retain the hairpin clips.
•
Carefully lower the front portion of the
deck to the ground.
•
Remove the hairpin clips which secure the
rear deck hangers to the deck stabilizer
bracket. See Figure 21. Retain the hairpin
clips.
•
Carefully lower the rear portion of the deck
to the ground.
NOTE: For normal service and maintenance,
the deck stabilizer bracket doesn’t need to
be removed from the tractor. If removing the
cutting
deck
in
order
to
mount
a
snowthrower attachment, however, the stabi-
lizer bracket must be removed. To do so,
simply remove the hairpin clip which secures
the stabilizer rod to the stabilizer bracket. See
Figure 20.
•
Place the deck engagement/lift lever in the
BLADES STOP position to raise the lift
links up, and out of the way.
•
Carefully slide the deck from beneath the
right side of the lawn tractor.
20
FIGURE 19
Belt Keeper Pins
Deck
Anti-sway Rod
Deck Belt
FIGURE 20
Adjustable Deck Links
Deck Anti-sway Rod
and Hairpin Clip
FIGURE 21
Stabilizer Rod
Stabilizer Bracket
Rear Deck Hangers
FIGURE 18
Hook
Spring
Transmission