ChemoMetec YC-100 - Manual (Page 50)

9 Technical specifications
38
Other environmental operating conditions for the NucleoCounter
Indoor use only.
Altitude Up to 2000 m.
INSTALLATION CATEGORY II (Refer to UL 61010A-1)
OVERVOLTAGE CATEGORY II (Refer to UL 61010A-1)
POLLUTION DEGREE II (Refer to UL 61010A-1)
9.2 The NucleoCassette™
Reagent Each NucleoCassette contains approximately 2,8 µg propidium
iodide.
Storage Store the NucleoCassettes in a sealed foil bag at max. 30°C.
Stability See documentation delivered with the NucleoCassettes.
9.3 EMC/EMI standards
The NucleoCounter YC-100 complies with EMC/EMI standards as follows.
EN61326: 1997+A1: 1998 (Class B) +A2: 2000, Electrical equipment for measurement,
control and laboratory use – EMC requirements (emission and immunity). Annex B and C
from A1: 1998 is used.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
10 Equipment and Accessories
10.1 Equipment and Accessories List
The equipment and accessories for the NucleoCounter are listed in the table below.
Ensure that items marked with this symbol are the only equipment and accessories
used together with the NucleoCounter.