ChemoMetec YC-100 - Manual (Page 30)

4 Installation and Start-up
18
After a successful start-up the display changes (Figure 9) and the status indicator on the
keyboard panel turns green.
NucleoCounter NucleoCounter NucleoCounter NucleoCounter
Ready Ready Ready Ready
Figure Figure Figure Figure 9 99 9 . . . . The NucleoCounter is ready for cell counting
If the instrument has performed as described above, it is ready for use. If the
instrument displays an error message at start-up please refer to chapter 7.
4.1.2 Shutting down
Pressing the “ On/Off” button shuts down the NucleoCounter and while the instrument
shuts down, the display will momentarily look as shown in Figure 10.
Bye. . . Bye. . . Bye. . . Bye. . .
Figure Figure Figure Figure 10 10 10 10. . . . The shutdown display .
4.2 Installation of NucleoView
Regarding installation of the optional NucleoView PC-software, please refer to the
NucleoView User’s Guide.