Checkline BL2 User Manual

Page 14

-14-

16.0

ACTIVATION OF THE “SUPER USER” FUNCTION

Two times

- Options – Unlock

Enter the 4-digit password by using the

button (standard is the 4-digit serial

number) and confirm by pressing the

button.

17.0

CHANGING THE USERLEVEL

Changing from advanced user to single user:

Make sure that you have activated the “super user” functions according to the
instructions above. Afterwards change to the menu and choose „Options“.

In the submenu please select „o Userlevel“ (two times

– Options – o Userlevel)

Confirm by pressing the

button. Now the single user is activated.

Changing from single user to advanced user:

Keep both the buttons

and

pressed directly after switching on the device. Your

humimeter automatically starts the main menu. Activate the the “super user”
functions according to the instructions above.

Navigate to “Options – o Userlevel” and confirm by pressing the

button.

18.0

DEVICE MAINTENANCE INSTRUCTIONS

To provide a long life of your device please does not expose it to strong mechanical
loads or heat e.g. dropping it or direct sunlight exposure. Clean your device using a
dry cloth. Any kind of wet cleaning damages the device.

It is not allowed to load the measuring head incorrect (stress, bending), other wise it
can be broken. Plug and remove the insertion probe of your BL2 straight into the
wood chips.

The instrument is not rainproof. Keep it in dry areas. When the device isn’t used for
a longer period (2 months) or when the batteries are empty, they should be removed
to prevent a leakage of the battery acid.

-15-

19.0

TRANSFER SAVED DATA TO THE PC

(Only possible with humimeter USB interface module)

To send your saved logs to the PC, connect the humimeter
device to your PC using the USB cable that was delivered
with your device. Carefully loose the protection cap on your
humimeter and plug in the USB mini B connector. The
bigger connector has to be connected to a USB slot on your
PC. Start the LogMemorizer software on your PC and switch
on your humimeter BL2.

The data transfer can be started on your humimeter or on
the software.

Starting the data transfer on the humimeter:
Press the

key until you reach the menu (see image on the

right). Then choose „Send Logs“ and confirm by pressing
the

key. Now choose „Manual Logs“ and confirm with

again. All saved logs will be sent to your PC.

Starting the data transfer on your PC:
Press the button „remote control“ in the LogMemorizer
software. A drop-down menu with several options opens
(see image below).

For transferring the data you can select „Import last manual
log“ (the last saved measuring series is transferred) or
„Import all manual logs“ (all saved logs are transferred).

If you click on one of these menu items, the transfer starts
immediately.

For the basic adjustments of the software please look
through the instructions on the LogMemorizer CD.