Checkline BL2 User Manual

Page 10

-10-

3. Plug the probe of your FLW tester straight into the

material. It is not allowed to load the measuring head
incorrect or drop it down!

4. Plug in the sensor cable into the socket of the BL2. Take

care of the correct position and fix it with the knurled nut.

5. Change the calibration curve: Press one time the

key

and then the

key. The name of the calibration

curve can be seen at the head of the display.

6. Now the display shows the water content. Left hand

the temperature is displayed.

7. To save the results in the save menu press the

(

button). The storage was successful when the

number in front of the symbol

increased. To reach the

store menu please press

until the

appears.

8. To name the saved results press the

button.

9. Remove the FLW tester straight with caution and clean the measuring head.

Risk of injury by measuring head!
Keep away from children!

11.0

CALIBRATION CURVES FLW TESTER

Calibration curve

Material

Digit 3

For special product

Empty 3

Customer calibration made by Checkline Europe

Test block

! Only for testing the BL2 with the test block !

-19-

and the guarantee stamp. If those are broken, no claims for guarantee can be
made. In case of a faulty device, please contact Checkline Europe.