Checkline MCT-HS - Manual (Page 6)

 Electromatic Equipment Co., Inc.
-6-
6.0 KEYPAD SYMBOLS
Measuring window:
Rolling Menu
Power ON / OFF
Switch upper
Switch lower
Save
Hold
Watch the saved data
Menu:
Enter
Switch upper
Switch lower
Exit
Enter numbers
Enter letters
Next or right
Left
Yes
No
Shift
OK
7.0 LIST OF CALIBRATION CURVES
Pressing the or key in the measuring window for at
least 3 seconds and a list with all available sorts will
appear. Select your sort by pressing or and confirm it
with the
key. The measurement will continue
automatically.
8.0 ACTIVATION OF THE “SUPER USER” FUNCTION
2 times - Options – Unlock
Enter the 4-digit password by using the
button (standard is the 4-digit serial
number) and confirm by pressing the button.
 Electromatic Equipment Co., Inc.
-11-
15.0 EXEMPTION FROM LIABILITY
For miss-readings and wrong measurements and of this resulting damage we refuse
any liability.
This is a device for quick determination of moisture. The moisture depends on
multiple conditions and multiple materials. Therefore we recommend a plausibility
check of the measuring results.
Each device includes a serial number and the guarantee stamp. If those are broken,
no claims for guarantee can be made. In case of a faulty device, please contact
Electromatic.
16.0 TECHNICAL DATA
Resolution of the display
0,1% water content
0,5°C temperature
Measuring range 8 to 30 % (60%)
Operation temperature 0°C to 40°C
Temperature measuring range -20°C to 120°C (only me asuring head)
Storage temperature -20°C to 60°C
Temperature compensation automatically
Power supply 4 pcs. 1,5 Volt AA Alkaline batteries
(for approx. 1000 measurements)
Auto Switch Off after approx. 6 minutes
Current consumption 55 mA (with light)
Display 128 x 64 matrix display, lighted
Dimensions 740 x 65 x 40 mm
Weight approx. 450g (incl. batteries)
Degree of protection IP 40
Scope of supply MCT-HS-PRO, wooden case
Software LogMemorizer
USB cable
4 x 1,5Volt AA Alkaline batteries
Compression plate