Checkline BM - Manual (Page 8)

 Electromatic Equipment Co., Inc
-8-
7.0 MENU LEVEL OVERVIEW
Next calibration curve
Previouse calibration curve
Power off (3 sec.)
Watch the saved data (logs)
Save new value (log)
Power off (3 sec.)
Type selection menu
Store menu
Main menu
Switch upper
Switch lower
Open this menu / Enter
Keypad symbols
Measuring window:
Rolling Menu
Power ON / OFF
Switch upper
Switch lower
Save
Hold
Watch the
saved data
Suppliers data
can be added
Menu:
Enter
Switch upper
Switch lower
Exit
Enter numbers
Enter letters
Next or right
Left
Yes
No
Shift
OK
Edit Logs
Manual Logs
Clear Logs
Print Logs
Last Log
All Logs
Clear Logs
Send Logs
Manual Logs
Clear Logs
Options
Status
Options
Date / Time
Log Time
Language
Unlock
°C / °F
o Userlevel
BL On Time
Auto Off Time
Materialcalib.
o Online Send
o Online Print
Password
Reset
Overview main menu
 Electromatic Equipment Co., Inc
-9-
8.0 TRANSFER SAVED DATA TO THE PC
To send your saved logs to the PC, connect the BM2 to your
PC using the USB cable that was delivered with your
device. Carefully loose the protection cap on your BM2 and
plug in the USB mini B connector. The bigger connector has
to be connected to a USB slot on your PC. Start the
LogMemorizer software on your PC and switch on your
BM2.
The data transfer can be started on your BM2 or on the
software.
Starting the data transfer on the BM2:
Press the
key until you reach the menu (see image on
the right). Then choose „Send Logs“ and confirm by
pressing the
key. Now choose „Manual Logs“ and
confirm with again. All saved logs will be sent to your PC.
Starting the data transfer on your PC:
Press the button „remote control“ in the LogMemorizer
software. A drop-down menu with several options opens
(see image below).
For transferring the data you can select „Import last manual
log“ (the last saved measuring series is transferred) or
„Import all manual logs“ (all saved logs are transferred).
If you click on one of these menu items, the transfer starts
immediately.
For the basic adjustments of the software please look
through the instructions on the LogMemorizer CD.