Checkline CAP-T - Manual (Page 4)

- 4 -
4.0 D ISPLAY
The display consists of a 4-1/2 digit
section and several indicators. Their
functions are listed below.
LO BAT Low battery voltage
indicator
CW Clockwise torque indicator
CCW Counterclockwise torque indicator
CW PEAK Peak clockwise indicator
CCW PEAK Peak counterclockwise indicator
OZIN, LBIN
NCM, KGMM Units of measurement (model dependent)
- - - - (dashes) Overload (>110% of range)
5.0 P OWER
The CAP-T may be powered by the internal 9V battery, or by the included
AC adapter. The need for battery replacement is indicated by a 3-step sequence:
1. A steady LO BAT appears on the display indicating the last 10% of
battery life
2. LO BAT begins to flash indicating the need for an immediate battery
replacement
3. The entire display except LO BAT flashes for several seconds and then
the tester shuts off.
- 9 -
10.0 S PECIFICATIONS
Accuracy ±0.5% of full scale ±1digit
Sampling rate 30/s
Display update rate 2.5/s in normal mode, 30/s in peak mode
Safe overload 150% of gauge capacity.
Display shows---- (dashes) above 110%.
Power 9V battery or AC adapter
Battery life 30 hours of continuous operation
Weight 10 lb [4.5 kg]
9.1 Force Ranges
Model Capacity Resolution
CAP-T-12 12 lb-in 0.01 lb-in
140 kg-mm 0.1 kg-mm
135 N-cm 0.1 N-cm
CAP-T-50 50 lb-in 0.05 lb-in
580 kg-mm 0.5 kg-mm
570 N-cm 0.5 N-cm
CAP-T-100 100 lb-in 0.1 lb-in
1150 kg-mm 1 kg-mm
1150 N-cm 1 N-cm