Checkline MX-5DL - Manual (Page 32)

Dakota Ultrasonics
28
7) Press the SEND key to select the clear file option. The symbol (
CLr? ) will be displayed.
8) Press the CLR key to confirm and clear the contents of the entire
file.
9) Press the MEM key, at any time, to exit the data logging functions
and return to measurement mode.
Clearing all Files
1) Press the ON/OFF key to power up the MX-5 DL.
2) Immediately press the CLR key. CLr? Will be displayed.
3) Press the CLR key once again to clear all files.
Sending All Files to a Computer
At the end of the inspection process, or end of the day, the user may
require the readings be transferred to a computer. The following steps
outline this procedure:
1) Refer to the section on Connecting to a Computer, page 23,
before proceeding.
2) Press the ON/OFF key to power up the MX-5 DL.
3) Press the MEM key to activate the data logging functions and
settings.
4) Press the UP / DOWN arrow keys to scroll to the SEnd / ALL
symbol flashing on the display.