Checkline MX-5DL - Manual (Page 31)

MX-5 DL Ultrasonic Thickness Gauge
27
Clearing an Entire File
The user may require the contents of an entire file be completely
cleared of all measurements. This would allow the user to start a new
list of measurements starting at storage location L001. The procedure
is outlined in the following steps:
1) Press the ON/OFF key to power up the MX-5 DL.
2) Press the MEM key to activate the data logging functions and
settings.
3) Press the SEND key to enter file setup.
4) Press the UP / DOWN arrow keys to scroll to the file that will be
cleared of all measurements.
5) Press the SEND key once again to select the file.
Note:
§ The display will flash the FILE / F-05 ( The file selected by the user
) symbol.
6) Press the UP / DOWN arrow keys to scroll to the flashing CLr / F-
05 ( The file selected by the user ) symbol.