Checkline MX-5DL User Manual

Page 22

Dakota Ultrasonics

thickness values that were entered in step 7. The MX-5 DL is now

ready to perform measurements within this range.

MX-5 DL Modes

Changing Units IN / MM

The MX-5 DL has the ability to display measurements in both the

English (IN) and Metric (MM) systems. The following steps outline the

procedure for changing units:

1) Press ON/OFF key to power up the MX-5 DL.

1) Press the MODE key to activate features and settings.

2) Press the UP or Down arrow keys to scroll to the unIt symbol.

3) Press the SEND key to toggle the status of the units - IN / MM.

4) Press the MODE key once again to return to measurement mode.