Checkline Series-3 - Manual (Page 20)

Series 3 Digital Force Gauges
User’s Guide
19
12 SPECIFICATIONS
12.1 General
Accuracy: ±0.3% of full scale ±1 digit
Sampling rate: 2,000 Hz
Power: AC or rechargeable battery. Low battery indicator appears when battery level is low, and
gauge powers off automatically when power reaches critical stage.
Battery life:
Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units: lbF, gF, kgF, N (depending on model)
USB output: Fully configurable up to 115,200 baud
Configurable
settings:
Digital filters, USB output, set points, automatic shutoff, default units, default mode, key
tones, audio alarms, calibration
Safe overload: 150% of full scale (display shows “OVER” at 110% and above)
Weight (gauge only):
M3-012 – M3-100: 0.7 lb [0.33 kg]
M3-200
– M3-500: 0.9 lb [0.41 kg]
Included accessories:
Carrying case, chisel, cone, V-groove, hook, flat, extension rod, AC adapter, battery, USB
cable, resource CD (USB driver, MESUR Lite software, MESURgauge DEMO software,
and user’s guide), NIST-traceable certificate of calibration with data
Warranty: 3 years (see individual statement for further details)
12.2 Factory Settings
Parameter Setting
Set points
Upper Disabled (defaults to 80% of full scale, compression, when enabled)
Lower Disabled (defaults to 40% of full scale, compression, when enabled)
Filters
Current 8
Displayed 1024
Backlight Auto
Minutes 1
USB Output
Baud Rate 9,600
Data Format Numeric + units
Automatic Shutoff Enabled
Minutes 5
Beeps
Keys Enabled
Alerts Enabled
Set Points Momentary
LCD Contrast 10
Initial Mode Real Time
Units lbF