Checkline Series-2 - Manual (Page 15)

Series 2 Digital Force Gauges User’s Guide
14
9.4 Initial Mode
This section is used to configure the initial mode upon powering on the gauge. To access this parameter,
select Initial Mode from the menu. The screen will appear as follows:
The default value is Real Time.
9.5 Information / Welcome Screen
The following screen is displayed at power up and can be accessed at any time by selecting Information
from the menu:
10 SPECIFICATIONS
10.1 General
Accuracy: ±0.5% of full scale
Sampling rate: 500 Hz
Power: AC or 9V non-rechargeable battery, with multi-step low battery indicator
Battery life:
Backlight on: up to 24 hours of continuous use
Backlight off: up to 92 hours of continuous use
Safe overload: 150% of full scale (display shows “OVER” at 110% and above)
Weight: 0.7 lb [0.33 kg]
Included items: 9V battery, quick-start guide, resource CD, certificate of conformance
Load cell deflection: 0.010 in [0.25 mm]
Environmental
requirements:
40 - 100°F, max. 96% humidity, non-condensating
Warranty: 3 years (see individual statement for further details)
Digital Force Gauge
Series 2
Model No: M2-50
Serial No: 1234567
Version: 1.0
(c) Mark-10 Corp.
INITIAL MODE
* Real Time
Peak Compression
Peak Tension