California Faucets Miramar 8" Widespread User Manual
Page 2
2
CF-4802_ii_120821.doc
Pg
2
3
INSTALLING VALVE
2-5/16”
• From underneath insert VALVE (10) though
appropriate sink/deck hole
IMPORTANT: VALVES (10) are labeled as follows:
BLUE
is
COLD
left turning (counter-clockwise) closed
RED
is
HOT
right-turning (clockwise) closed
• Position flange NUT (9) and WASHER (8) so that
VALVE (10) extends 2-5/16” above sink/deck
surface
• Attached RING (2) onto ESCUTCHEON (11)
•
Place ESCUTCHEON (11) onto VALVE (10) and
secure to sink/deck surface
INSTALLING HANDLE
• Loosen SETSCREW (12c) from HANDLE (12a or
12b)
• Slide HANDLE (12) down onto and engage valve
STEM (10a)
• Allow a minimum gap (1/32”) between HANDLE
(12) and ESCUTCHEON (11), tighten SETSCREW
(12c)
IMPORTANT: To obtain proper alignment it may be necessary to
rotate VALVE (10) so that HANLDE (12) is aligned to desired
orientation