California Faucets Mini-Widespread Faucets - Manual

Stainless
Washer
Lock
Nut
White
Washer
Rubber
Washer
Shaft
Nut
Brass
Washer
4-Way
Tee
1"
Plastic
Nut
Hot Cold
Fiber
Washer
1 1/8" Hole size
for drilling
4-Way
Tee
IMPORTANT
All California Faucets products are engineered to provide quality performance provided they
are installed and operated properly. To fully enjoy the comfort, safety, and reliability of your new
Mini Widespread faucet, please follow the instructions below.
INSTALLATION
INSTRUCTIONS MINI WIDESPREAD FAUCETS
NOTE: Due to sediment in the water it may
be necessary on occasion to remove the aerator
and clean the screen with a soft bristle toothbrush.
1
Install spout :
***NOTE: SHUT OFF WATER SUPPLY BEFORE BEGINNING INSTALLATION***
-Remove the tee, locknut and stainless steel washer.
-Insert the spout through center hole of the sink or
countertop.
-Place washer and lock nut onto shank
from below. Align spout and tighten nut until spout is
firmly in place.
-Insert white washer into top of tee and slide assembly
onto spout shank.
-Place the rubber washer, brass washer and shaft nut
onto shaft and tighten.
Fig. 2
Fig. 1
1/2"x3/8"x12"
Flex Hose
All Mini Widespread faucets meet A112.18.1 - 2.2gpm/8.31 L/min.
4" Min.
Tel: 714-891-7797
Fax: 714-891-2478
Toll Free: 800-822-8855
www.calfaucets.com
R
California Faucets reserves the right to make modification and specification changes at any time.
Please visit www.calfaucets.com for most current technical data.
Ref. MW-INSTL (V 01) 08/17/06 Continued