California Faucets Single Hole High Lavatory Faucet - Manual

CF-E201-2_ii_140201.doc Pg 1
CF-E201-2
Single Hole Lavatory Vessel Faucet
Installation Instructions
1
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Operating Specifications:
Recommended Supply Pressure:
20 to 70 psi *
* If water pressure exceeds 70 psi, install a Pressure-Reducing Valve (RPV).
INSTALLING FAUCET TO SINK/DECK
Insert O-RING (2) into bottom of BODY (1) and center
over sink/deck THROUGH-HOLE (3)
NOTE: Recommended sink/deck THROUGH-HOLE is Ø1-3/8”
Insert FLEX HOSE (5) (one at a time) and THREADED
ROD (4) though sink/deck THROUGH-HOLE (3)
From underside of sink/deck THROUGH-HOLE (3),
place MOUNTING BRACKET (6) and NUT (7) onto
THREADED ROD (4)
Align BODY (1) so that spout is centered into sink
Tighten NUT (7) until BODY (1) is secure to sink/deck
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
BY A LICENSED PROFESSIONAL