California Faucets Miramar 8" Widespread User Manual
Miramar

Miramar
™
CF-4802 & CF-4802X
Widespread Lavatory Faucet
Installation Instructions
CF-4802_ii_120821.doc
Pg
1
1
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
BY A LICENSED PROFESSIONAL
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Operating Specifications:
Recommended Supply Pressure:
20 to 70 psi
*†
Maximum
Flow
Rate:
1.5
gpm
*
Operating pressures between hot and cold supplies should vary no more than 30 psi.
†
If water pressure exceeds 70 psi, install a Pressure-Reducing Valve (RPV).
INSTALLING SPOUT TO SINK/DECK
• Sink/Deck recommended hole size shall be Ø1-3/8”
• Attach RING (2) onto BASE (3) and slide onto
spout SHANK (1a)
• Insert spout SHANK (1a
) though sink/deck hole
• From underside, place SLOTTED WASHER (4)
onto spout SHANK (1a) and tighten SPOUT (1)
into place with NUT (5)
• Insert RUBBER WASHER (6) into TEE (7) and
attach to spout SHANK (1a)
IMPORTANT: TEE (7) should be tighten to create watertight seal
and positioned to allow ease of attachment of valve hoses
Ш
1-3/8”