BUCHI SpeedDigester K-436 - Manual (Page 33)

6 Operation
33 K-425 / K-436 Operation Manual, Version A
4
5
Glass cap (for unused positions)
When the digestion session does not require a full set of samples equip unused positions with a •
glass cap to tighten the suction circuit 5!
Follow the installation steps in section 6.2.3 to install the suction module.
•
If applicable, follow the previous steps to install sample tubes in a second rack. •
➡ The sample tubes are now securely installed in the rack(s) and can now safely be processed in
the SpeedDigester.
Note
Unused positions should be arranged at the rear end of the rack. •
Close unused positions with a glass cap towards the suction unit. •