BUCHI SpeedDigester K-436 - Manual (Page 13)

3 Technical data
13 K-425 / K-436 Operation Manual, Version A
3 Technical data
This chapter introduces the reader to the SpeedDigester K-425 / K-436 and its specifications. It
contains the scope of delivery, technical data, requirements and performance data.
3 .1 Scope of application and delivery
All system configurations come with a limited set of accessories as a starter kit. Within a system family,
additionally available accessories (see section 3.1.2 and the following) can be used to easily recon-
figure your system to every configuration listed in section 3.1.1.
Parts that are required to change a system configuration:
Rack •
Suction module •
Insulation plate (fireclay insert) •
Sample tubes •
The scope of delivery depends on the ordered system configuration and can be checked according to
the individual delivery note and the listed order numbers.
Note
For additional information about the listed products, see www.buchi.com or contact your local dealer.
3 .1 .1 Available system configurations
SpeedDigester K- 425
Configuration
order number Sample
positions
Sample tube sizes Suction modules
110 – 120 V 220 – 240 V 5 6 250 ml 300 ml 500 ml Standard
Condensate
trap
H
2
O
2
Module for
3rd party
tubes
1154251500 1154252500
• • •
1154251100 1154252100
• • •
1154251200 1154252200
• • •
1154251300 1154252300
• • •
1154251400 1154252400
• •* •*
* Third party sample tubes require special accessories such as the BUCHI “Module for 3rd party
tubes” and the matching rack / insulation plate. Tubes are not included in the set!
Note
The SpeedDigester K-425 is available in different versions for 110 – 120 V or 220 – 240 V mains supply.
Check your local voltage requirements and order accordingly!