BUCHI UV-Vis Detector C-640 - Manual (Page 11)

3 Technical data
11 C-640 Operation Manual, Version A
3 Technical data
This chapter introduces the reader to the instrument and its specifications. It contains the scope of
delivery, technical data, requirements and performance data.
3 .1 Scope of application and delivery
The UV-VIS Detector C-640 is available as powerful detector for the Sepacore system. It can be used
in conjunction with the SepacoreControl software, connected to the C-620 control unit or without the
use of the software, connected to the C-660 fraction collector.
The instrument can measure the change of the absorption behavior of a sample at four selected
wavelengths in the range of 200 to 840 nm.
In conjunction with the SepacoreControl software it is also able to scan the whole range of the spec-
trum continuously.
The scope and completeness of delivery can be checked according to section 3.1.2 Standard equip-
ment. After unpacking please check the instrument and all accessories thoroughly for any damages!
NOTE
For additional information about the listed products, see www.buchi.com or contact your local dealer.
3 .1 .1 Standard instrument
Table 3-1: Standard instrument
Product Order no.
UV-VIS Detector C-640
with preparative flow cell 11058148
Complete UV-VIS Detector C-640 system for use
in conjunction with the SepacoreControl software.
Complete with preparative flow cell, necessary cables
fittings and tubing.