BUCHI Melting Point M-565 - Manual (Page 34)

6 Operation
34 Melting Point M-565 Operation Manual, Version D
6 .2 .7 .2 Melting range
• In the settings, change the
melting result to Melting
range and press Save.
An additional parameter is
shown. The default value is
set to 15%. This value can be
used for most of substances. Threshold: This value is
needed only for melting range
determination. The default
value is set to 15%. This value
can be used for 80% of sub-
stances.
• If the beginning of the
melting range differs from
that observed, increase or
decrease this value.
The result mode shows a
range for each sample:
XX.X–XX.X °C In the replay mode, the melt-
ing range is shown in gray
backlit.