BUCHI Melting Point M-565 - Manual (Page 28)

6 Operation
28 Melting Point M-565 Operation Manual, Version D
NOTE
Insert samples only when the start temperature is reached (as soon as prompted).
• Press START to start the
determination, and follow
the instructions on the
screen.
The instrument requests a
sample ID during preheating
(for details on entering text
see 6.1.3). This request can
be switched off by chang-
ing the setting “Sample ID
request” (see 6.5). • Insert samples and press
START to start the deter-
mination.
• To register additional
temperature stamps, manu-
ally press the
SET button
for the related sample. Each
button can be pressed
three times. Registered
temperature stamps are
displayed in green.
NOTE
The result is indicated automatically after the melting point of each sample is detected.