BUCHI Syncor Polyvap - Manual (Page 41)

Syncore Platform
41
9 Appendix
9 Appendix
9.1 Technical data
Dimensions of the unit (LxBxH) 480 x 487 x 354 mm
Weight 30 Kg
Power connections 230 VAC, 50/60 Hz, +/-10 %
120 VAC, 50/60 Hz, +/-10 %
100 VAC, 50/60 Hz, +/-10 %
Power take-up 1500 W
Power take-up for the vacuum connection Maximum 120 W
Ambient temperature 5°C-40°C
Environmental conditions for indoor use only
Altitude up to 2000 m above sea level
Humidity maximum relative humidity 80 % for temperatures up to
31 °C, and then linearly decreasing to 50 % at 40 °C
Range of temperatures: Heating plate -20°C to room temperature (with external cooling unit)
Range of temperatures: Heating plate Room temperature to +150°C
Range of temperatures: Vacuum connection Room temperature to +70°C
Rotational speed 0-600 rpm
Pre-set safety settings Speed, Min. and max. temperature, AutoStart
Program 9 Steps of up to 9 hours , 59 minutes
Connections TTL for an external ON / OFF signal
Valve connection 24 V DC, temperature-controlled, hysteresis 0.5°C
Valve connection 24 V DC, programmable
Installation category II
Pollution degree 2
RS-232 Inactive
Technical Data
9.2 Materials used
Description Materials Material Code
Single platform Sheet steel, coated St 12.03
Protective shield Plexiglass PMMA
Rubber covering Black natural rubber NK
Rack Aluminum, anodized AL
Vacuum connection Aluminum with PFA coating AL
Glass in vacuum connection Borosilicate glass, hardened 3.3
Vacuum hose Ribbed PFA PFA
Condenser unit Borosilicate glass 3.3
Sealing discs Rack R-6 PTFE coating PTFE/rubber
Glass with residual volume appendage
Glass R-4 and Glass R-6 Borosilicate glass 3.3
Sealing discs, Rack R-24 and R-96 Polyethylene PE
Cooling plate Aluminum, anodized AL
Materials Used