BUCHI Syncor Polyvap - Manual (Page 38)

Syncore Platform
38
6 Maintenance
6.7 Error messages: Hardware
Error No. Cause Correction
1 Hardware ROM BUCHI service agent
2 Hardware RAM BUCHI service agent
3 AD transducer BUCHI service agent
4 Checksumm EERPOM BUCHI service agent
5 Hardware error EERPOM BUCHI service agent
6 Power supply +24V BUCHI service agent
Motor not within tolerances
7 Power supply +24V BUCHI service agent
Heating not within tolerances
8 Hardware error START button BUCHI service agent
9 Hardware error START button BUCHI service agent
10 Hardware error START button BUCHI service agent
11 Hardware error START button BUCHI service agent
12 Hardware error START button BUCHI service agent
13 Hardware error START button BUCHI service agent
14 Hardware error START button BUCHI service agent
15 Motor drive BUCHI service agent
16 Temperature sensor channel short-circuit BUCHI service agent
17 Temperature sensor channel 1 interruption BÜCHI service agent
18 Power system voltage not within tolerances BUCHI service agent
19 Temperature sensor channel 2 short-circuit BUCHI service agent
Error messages: Hardware
6.8 Customer service
Only authorized service staff are permitted to intervene on
or within the unit.
The addresses of the official BUCHI Customer Service agents
are shown on the back cover page of this Operation Manual.
In case of malfunctions, technical questions, or problems in
application, please contact these offices.
BUCHI’s Customer Service Depts. stand ready to help you
with the following:
• Spare part service
• Repair service
• Maintenance service
• Technical consultation