Aviom AN-16/o - Manual (Page 18)

10 AN-16/
o
o
utput
M
odule
u
ser
G
uide
Front Panel
F
u n c t i o n
1 Clip LED, red ‑ lights when the audio signal hits (0dB) full scale at the
input module, indicating that the source audio signal is too high.
2 Signal Present LED, green ‑ lights to show that an audio signal is present
on a channel
3 Output Level Switch ‑ in the left position, the channel pair is output
at mic level; move the switch to the right to select +4dBu, +18dBu, or
+24dBu line‑level output.
4 Power LED ‑ indicates that the AN‑16/o is on
5 A‑Net LED ‑ indicates that the AN‑16/o is receiving valid A‑Net data




