360 Systems Instant Replay DR-550 - Manual (Page 14)

page 8 Instant Replay Owner’s Manual
Playlist
Playlists allow you to create and playback a sequence of Presets. You can set Playlists for
Follow-On as well as Manual-Step playback (see page 9, Using Playlists). You can create
one Playlist for each Bank.
Loop
LOOP causes a Cut to repeat endlessly until either STOP or LOOP is pressed. STOP ends
playback immediately and turns off Loop mode. Pressing LOOP a second time exits from the
Loop mode, and allows the current Cut to continue playing to its end.
While a Cut is looping, another Cut can be selected for playback. A different Preset can also
be triggered. The new Cut will immediately start from the beginning, and will also loop until
LOOP
mode is exited.
Looping works in all modes. You can loop a single Cut, or an entire Playlist when in Playlist
mode, whether it is a Manual-Step Playlist or a Follow-On Playlist.
Pause
PAUSE interrupts playback of a Cut. When pressed again, playback will resume.
Note that while Instant Replay is paused, pressing a Hot-Key displays the Preset’s title and
statistics, but the Preset will not play.
Menu
The MENU button selects one of several different Menu items, which appear in rotation
when you press the SCROLL ARROWS. When the desired item is displayed, press ENTER
to select it. The SCROLL ARROWS will then select the Options available within that Menu.
CANCEL will return to the selection of other Menus.
Once a Menu Option is selected, pressing ENTER will select of a value for that Option. The
second line of the display will flash to indicate that the value may be changed. The SCROLL
ARROWS (or in some cases the keyboard) are used to select a value. ENTER will confirm
the new value, and CANCEL will restore the previous one.
Pressing MENU a second time will exit to normal operation.
Cancel
This button is used to end operations, exit menus, or to answer "no" to display prompts.