360 Systems Instant Replay DR-550 - Manual (Page 13)

Instant Replay Owner’s Manual page 7
TRANSPORT CONTROL BUTTONS
The Transport Controls include STOP, PLAY and RECORD. They perform in the traditional
manner of tape recorders:
Stop
Immediately ends recording or playback.
Play
Starts playback of the currently selected Cut. Note that pressing PLAY initiates playback
from the beginning of the selected Cut, even if it is already playing. The exception is when
PLAY is used to disengage PAUSE.
Record
Places Instant Replay in Record Ready mode. (Instant Replay will allocate disk space, and
then enter record when the PLAY button is pressed.)
FUNCTION BUTTONS
These include:
Bank Select
When you press the BANK SELECT button, it lights and the top row of Hot-Keys blink. The
display changes to show the number and name of the current Bank; the number of Presets it
contains; and an indication of the presence of a Playlist in the Bank. Pressing Hot-Keys 1-10
will directly select the corresponding Bank.
Alternately, the SCROLL ARROWS may be used to view the Banks. Pressing ENTER will
activate the Bank who's name is currently shown on the display. Pressing BANK SELECT
again or CANCEL exits this mode.
Assign Preset
The assign preset button lights and the Display prompts selection of a Preset. Pressing a Hot-
Key immediately assigns the Cut shown in the top line of the Display to that Preset. To exit,
press assign preset again, or cancel.
Preview
Mutes the main audio output, so Cuts can be auditioned from the headphone output only.
If PREVIEW is turned on during playback, the display changes from showing the current Cut
and playing time, to showing the ID Number, Name, Length and Preset Assignment of any
Cuts selected. The current Cut will continue playing from both the main and headphone
outputs.
In either case, pressing PREVIEW a second time exits this mode and restores normal
operation. If no Cut is playing, CANCEL will also end Preview.