Steffes 1003 - Manual (Page 3)

Intr Intr Intr Intr Introduction oduction oduction oduction oduction
• This manual provides information for the correct installation procedures and electrical connections for
Steffes ETS room heating units, Models: 1002 and 1003. The information in this manual can help you
take full advantage of the many features built in to your heater and ensure years of safe, reliable opera-
tion. Read all the information contained within this manual before installing the system. Store this
manual in a safe place for future reference.
• Assembly of and/or service to these units should be performed only by a qualified electrician in accor-
dance with information contained herein and in accordance with national, state, and local electrical
codes.
• This manual should be retained by new owners if ownership of the heater changes.
• Any deviation from these instructions may void the warranty and could result in hazardous operating
conditions.
• A Supplemental Installer's Guide is available from the factory or distributor (with power company
consent) and should only be made available to installing electrical contractors or to power company
personnel. This guide describes those heater functions that are related to power company control and
how to change them. It is not required to complete an installation.
• The warranty registration card provided as part of the documentation included with the heater must be
completed and returned to Steffes Corporation. Failure to do so may adversely affect warranty claims.
• Record the Serial Number and Model Number in the space provided in the Customer Notes section of
this Owner's Manual. These numbers are located on the lower right side of the heater, on the shipping
box, and on the Warranty Registration Card. Retain this manual for quick future reference to these
numbers.
• Disclaimer: In compiling this manual, Steffes Corporation has used its best judgement based upon
information available, but disclaims any responsibility or liability for any errors or miscalculations
contained herein, or any revisions hereof, or which result, in whole or in part, from the use of this
manual or any revisions hereof.
Dear Valued Customer:
Congratulations on your new purchase! The Steffes ETS heaters are of the highest quality storage heat
systems available today. We are confident you will be pleased with the warm, comfortable heat this system
provides as well as the savings you should see in your electric heat bill.
Electric Thermal Storage has been used in the United States for over 20 years. Today, Steffes is known as
the leader in this technology. Not only are we setting the industry standards for quality; but, we are also
working closely with power companies to ensure comfort, safety, reliability, service, and support needs are
being met.
We are committed to ensuring your new heating system will provide you with total satisfaction for many
years to come. Your support is appreciated and your comments on the equipment are welcome.
Thank you for choosing Steffes ETS!
Sincerely,
Paul Steffes
President and Chief Executive Officer
2