beautypg.com

4 power on your computer, 5 open the disc tray, 6 place a disc – Panasonic CF-VDD272 User Manual

Page 7: Removing a diso, 7 close the disc tray

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

4

Power on your computer

5

Open the disc tray

Press the eject button and slowly pull out the

tray.

6

Place a disc

Place the disc with the label facing upward in
the drive and push down until the center holder

clicks.

Place a finger on the center holder and lift

up on the edge of the disc.

7

Close the disc tray

Close the tray without touching the eject button.

Label side up

Eject Button

Center Holder

IDo not apply excessive force to the tray in the open position, doing so could damage

the tray.

I

If the PC Card does not work, there may be no interrupt request (IRQ) line avail­
able. Deactivate unnecessary equipment using in Setup Utility.

See also other documents in the category Panasonic Hardware: