Blue back mode, Note, P«de mode (picture detail enhancer) – Panasonic TX-47WG25 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Remote Control Operation
Features Menu Operation
BLUE BACK Mode
When no picture signal is received, or
the signal is weak, the screen reverts
to a blue background colour and the
Sound is muted.
Disable this Feature to continue
watching very weak signals.
Blue if no input picture signal or input
signal is weak.
Note:
(1) In the Blue Back Mode the screen size
is forced to FULL nnode.
(2) If BLUE BACK Mode is set on while a
VCR signal is being viewed, selecting
CUE or REVIEW may cause the screen
to revert to the blue background colour.
Disable this Feature to view correctly.
RF/AV Mode
Reproduction of irregular signals, such
as certain rental video tapes, may be
improved.
ВШЕ BACK
ON
IRF/AV
ON I
P - DE
ON
SELF ASPECT
JUST
SIDE BAND
LIGHT 1
CONVERGENCE
P«DE Mode (Picture Detail Enhancer)
The Picture Detail Enhancer System is
designed to improve the picture
sharpness. It should be OFF position to
reduce picture noise during poor quality
reception conditions.
BLUE BACK
ON
RF/AV
ON
IP-DE
ON \
SELF ASPECT
JUST
SIDE BAND
LIGHT 1
CONVERGENCE
When the Picture Detail Enhancer System
is ON, the picture will be sharper.
BLUE BACK
ON
RF/AV
ON
IP DE
“OFFl
SELF ASPECT
JUST
SIDE BAND
LIGHT 1
CONVERGENCE
When the Picture Detail Enhancer System
is OFF, picture noise will be softened and
less sharp.
50