Still, Note, Audio swap – Panasonic TX-47WG25 User Manual

Page 41: Sub picture programme number selection, Sub picture channel search, Position buttons, Advanced remote control operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advanced Remote Control Operation

[ A ]

STILL

The Still function can be used to
freeze the action on the screen and
display a still picture of the Sub

picture.

Push the “STILL” Button to freeze

the moving picture into a still

picture.

Push again to cancel.

Note;

If still picture cannot be avoided,
reduce the brightness and contrast

levels of the picture to minimize any
damage that might occur.

audio

SWAP

AUDIO SWAP

The AUDIO SWAP button is the

changeover button for the sounds

(audio programme content) of the
MAIN and SUB Picture.

Push it to hear the sound of the

SUB Picture. However, note that

the sound of MAIN Picture can not

be heard when the SUB Picture
sound is selected.

Push again to cancel.

Sub picture Programme Number
Selection

Push the Sub picture Programme
Number Up V’ or Down ‘V’ Button

to select the next higher or lower

tuned channel.

Sub picture Channel SEARCH

By pushing this button, it is possible
to search through all programmed
numbers and display a picture on
the sub picture screen.

Channel Search

Number

HD E

Position Buttons

By pushing each “Position” Button,
you can easily select the desired
position of the Sub Picture on the
screen.

Push again to stop the channel

search in the desired programme

number.

Note:

By pushing the Normal “N” Button

while the picture in picture mode is

activated, the Sub Picture position

will move to the bottom Right
corner.