Panasonic CF-VDL01 - Manual (Page 12)

Adjusting the LCD Monitor
um\ (Color)
Color
Auto Balance
RGB
Color Temperature
The Color menu is used to adjust the brightness of Red, Green, Blue, or all color
channels.
Select the item by pressing or ^ , then press
5 (Position)
Position
H-Position
V-Position
Auto Center
Select [|], the color is adjusted automatically.
The sub-menu is displayed.
Select the item by pressing or ^ , then press [ 2 ].
The sub-menu is displayed.
Adjust by pressing or ^ , then press . (If you want to cancel, press Q])
The sub-menu is displayed.
Select the item by pressing ^ or ^ , then press .
The sub-menu is displayed.
Adjust by pressing or ^ , then press . (If you want to cancel, press □ )
The Position menu allows the adjustment of image position in Analog input mode.
Select the item by pressing or ^ , then press [ 2 ].
H-position is used to adjust the horizontal image position manually. A slider and the
current value are displayed. The adjustment range is 0 to 127.
Adjust by pressing or ^ , then press [ 2 ]. (If you want to cancel, press Q] )
V-position is used to adjust the vertical image position manually. A slider and the
current value are displayed. The maximum value for Vertical Position is to 0 to 47.
Adjust by pressing or ^ , then press [ 2 ]. (If you want to cancel, press Q] )
Select , the position is adjusted automatically.
^ (Image)
Image
Phase
Clock
Auto Phase
The image menu allows the adjustment of ADC clock and phase in Analog input mode.
In Digital, Video, and S-Video input modes, clock and phase are fixed.
Select the item by pressing ^ or ^ , then press [ 2 ].
12