Note – Panasonic TC-W21 User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CH_^

CH 1 ^

♦

CHia

♦

CH12

Note:
If the sound is not clear or no sound is produced on a
Channei position, refer to the “Sound System Seiection"
Operation on page 38.
Channeis selected by using the "CS” button foliow the CCIR
channel numbering system.

For information on how to relate CCIR channel numbers to

Australian and New Zealand channel numbers, refer to page
23.

Note:

The on-screen display will indicate both numerically and
graphically the volume level. Numeric levels start at “0” for

no sound, and will increase up to 63 which is the maximum
sound level.

You can sequentially select TV and AV modes.

Note:
(1) When AV mode is selected and the selected AV mode

has no picture signal, the Background colour of the TV
screen will change. (When Blue Back is set to the ON

condition. Refer to pages 44 and 45.)

(2) When TV mode is selected again, the previous

Programme Number will re-appearon the screen.

Note:

The function of the Normal button on the TV itself differs to
that of the Normal button on the Remote Control.

For Normal button function using the Remote Control, refer

to pages 42 and 43.

Continued on the next page.