Panasonic TC-W21 User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

It is also possible to turn the TV set on by pushing the “Direct
Programme Number Selection” Buttons (0-9) or the

“Programme Number Up or Down" Buttons.

Note:

1. Do not leave the television in the Stand-by condition for

extended periods of time.

It is also recommended that you turn the Television Off,

for a short (approximately 1 hour) period, using the Main

Power ON/OFF Switch periodically (e.g. weekly).

2. This allows, when the television is again turned on.

Automatic Demagnetization of the picture tube to be
carried out.

if the television is not turned Off at the Power switch for
an extended period, poor picture Colour Quality may
become evident through residual magnetism within the
picture tube.

Start

Button

V Button

Note:
If the SKIP function has been set in either the next higher or
lower Programme Number, then that skipped Programme
Number will not be shown.

You can select the numbers 0 to 9 directly, by pushing the
corresponding number on the Remote Control.

You can select a two digit Programme Number.

Continued on the next page.