Helpful hint – Panasonic TC-W21 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PRESET

If the sound is not clear or

no sound is produced on a

Programme Number
Position, push the Volume
Up V or Down Button.

Push the “PRESEr Button

4 times.

CH16 PRESET

SYS SELECT

COR

AUTO TUNE

MANUALTUNE

SOUND SYS

5.5MHz

COLOUR SYS

AUTO

FINE TUNE
SKIP

OFF

You may improve the Sound
quality.

The sound indicator will
change as follows.

r>4.5MHzf^5.5MHzfi

->6.5MHzO6.0MHz<-

This returns the set to the

normal viewing condition.

Helpful Hint

(1) If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the “Colour System

Selection” Operation on page 39.

(2) After the Manual Search is finished, push the Programme Number “Up” Button to confirm the tuning condition for

each Programme Number. If a Programme Number is unused, it is possible to skip such Programme Numbers.

Please refer to the Programme Number Skip Operation on page 30.