beautypg.com

Installation & grounding instructions, Examine your oven, Placement of oven – Panasonic GENIUS 1100 NN-S588 User Manual

Page 5: Power supply, Wiring requirements, Radio interference, Grounding instructions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

INSTALLATION & GROUNDING INSTRUCTIONS

Examine Your Oven

Unpack oven, remove all packing material, and examine the oven

for any damage such as dertts, broken door latches or cracks in the

door. Notify dealer immediately if oven is damaged. Do NOT install
if oven is ckmaged.

Placement of Oven

1. Oven must be placed on a flat, stable surface. For proper

operation, the oven must have sufficierTt air flow. Allow 3 inches

(8

cm) of space on both sides of the oven and 1 inch (2.5 cm) of

space on top of oven.
a. Do NOT block air vents.

If they are blocked during operation, the oven may

overheat. If the oven overheats, a thermal safety device
will turn the oven off. The oven will remгlin inoperable until

it has cooled.

b. Do NOT place oven near a hot damp surface such as a

gas or electric range.

c. Do NOT operate oven when room humidity is too high.

2. This oven was manufactured for household use only.

Grounding Instructions

This appliance must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock by

providing an escape wire for the electric current. This

appliance is equipped with a cord having a grounding wire
with a grounding plug. The plug must be plugged into an outlet

that is properly installed and grounded.

WARNING—Improper use of the grounding plug can result in
a risk of electric shock.

Consult a qualified electrician or service person if the
grounding instructions are not completely understood, or if
doubt exists as to whether the appliance is properly grounded.

If it is necessary to use an extension cord, use only a three

wire extension cord that has a three blade grounding plug, and
a three slot receptacle that will accept the plug on the
appliance. The marked rating of the extension cord should be
equal to or greater than the electrical rating of the appliance.

Power Supply

1

. A short power-supply cord is provided to reduce the risks

resulting from becoming entangled in or tripping over a
longer cord.

2. Longer cord sets or extension cords are available and may

be used if care is exercised in their use.

3. If a long cord or extension cord is used, (1) the marked

electrical rating of the cord set or extension cord should be at
least as great as the electrical rating of the appliance, (

2

) the

extension cord must be a grounding-type 3-wire cord, and (3)

the longer cord should be arranged so that it will not drape

over the countertop or tabletop where it can be pulled on by

children or tripped over accidentally.

Wiring Requirements

1. The oven must be on a SEPARATE CIRCUIT. No other

appliance should share the circuit with the microwave oven.

If it does, the branch circuit fuse may blow, or the circuit

breaker may trip or the food may cook slower than the times

recommended in this manual.

2

. The VOLTAGE used must be the same as specified on this

microwave oven (120V). Using a higher voltage is
dangerous and may result in a fire or other accident causing
oven damage. Using a lower voltage will cause slow

cooking. Panasonic is NOT responsible for damage

resulting from the use of the oven with other than specified

voltage.

3. The oven must be plugged into at least a 20 AMP 120

VOLT, 60 Hz GROUNDED OUTLET.
Where a standard two-prong outlet is encountered, it is the

personal responsibility and
obligation of the consumer

to have it replaced with a

properly grounded three-
prong outlet.

4. A TEMPORARY CONNECTION with a two-prong adapter

may be made where LOCAL CODES PERMIT. Unless the

cover screw is grounded through the house wiring,
attaching the adapter
grounding plate to the
cover screw will not

W")

ground the oven. If
there is any doubt that
the cover screw is
grounded, have it
checked by an electrician.

Radio Interference

1. Operation of the microwave oven may cause interference to

your radio, TV or similar equipment.

2. When there is interference, it may be reduced or eliminated

by taking the following measures:

a. Clean door and sealing surfaces of the oven. (See Care

of Your Microwave Oven, p. 33).

b. Place the radio, TV, etc. away from the microwave oven

as far as possible.

c. Use a properly installed antenna to obtain stronger signal

reception.

- 3 -

This manual is related to the following products: