Panasonic GENIUS 1100 NN-S588 - Manual (Page 13)

^_____
mer Function
This feature allows you to program a standing time after cooking is completed and to program the oven as a minute
timer and/or to program delay start.
To Use as a Timer
Press Timer
2 \
. i
6
■■■■■
. 7 8
£
V\K¡qht
start 1
PRESS once for TIMER. MENU ACTION MESSAGE is
‘TIMER — SET TIME” {up to 99 min & 99 seconds). Number pad flashes.
Set desired amount of Time
Example: Set the time for 15 minutes using flashing number pad
□ m 0
MENU ACTION MESSAGE is
‘TIMER 15 min 00 sec — PRESS START. Start flashes.
Press Start
Display counts down without oven operating. Five beeps will normally
sound at the end (see
Function pad for options). MENU ACTION
MESSAGE is “ENJOY YOUR MEAL”.
To Set Stand Time
Set Desired
Cooidng
Program
e.g. High 12 min.
(See page 10)
To Set Delay Time
Timer
Clock
\ \ I / /
-'QHQ-
-□SD-
/ / I \ \
\ I /
Start
Press
once.
Set desired
amount of stand
time using flashing
number pads.
/ / I \ s
Press.
Cooking will start. After
cooking, stand time will
count down without oven
operating.
Timer
Clock
Press
once.
\ \ \ / y
''ESH-
j : bbb : i ■ »
"EBB-'
-QBB-
/ / I \ \
Set desired
amount of stand
time using flashing
number pads
Set Desired
Cooking
Program
e.g. High 12 min.
(See page 10)
\ I t
start
/ / I \ \
Press.
After completed
delayed time, cooking
will stert
NOTE:
1. When the first/second stage has finished, a two beep signal is heard. After all the stages have been completed, the oven will
beep five times.
2. If oven door is opened during the Stand Time of Kitchen Timer, the time in the Display Window will continue to count down.
3. Delay Start cannot be programmed before any Sensor Control Function. This is to prevent the starting temperature of the food
from rising before defrosting or cooking begins. A change in the starting temperature could cause inaccurate cooking results.
4. Timer can be set up to 99 minutes and 99 seconds.
-11
-