When the code is not known, When the code is known, Reference – Panasonic TU-IRD10 User Manual

Page 49

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REFERENCE

When the Code is Not Known

Procedure for setting up remote using the numerical

buttons:

Confirm the device is plugged in and operating

properly.

Press and hold both the MENU/SELECT and the

POWER button at the same time for at least five

seconds; then release both buttons.

Press the Mode button that you want to program

(TV, CBL, RCVR, VCR1, VCR2, AUX, or LD).

Press the VOL UP button to step to the next code.

Press POWER to send a test signal. If the code is

correct, the device will respond correctly.

- Repeat the preceding steps until the proper

' device code is found. It may take several

attempts before the correct code is found.

When the correct code has been found (the device

turns on), press the MENU/SELECT button to store

the code.

For future reference, write down the code numbers for each device in the space provided:

CBL

(cable box)

RCVR

(Receiver or Amplifier)

other component

VCRl

VCR2

(Laser Disc Player)

other component