Connection d, Good picture and sound quality), To connect tv and antenna or cable box – Panasonic TU-IRD10 User Manual
Page 39: To receive dss® programming, To receive off-air programming (no cable box), To receive cable programming (with cable box), Caution, Connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
Connection D
Good Picture and Sound Quality)
To use this connection you must have:
•
TV with RF input
•
Coaxial cables
To connect TV and antenna or cable box:
1. Connect coaxial cables as shown.
To receive DSS® programming:
•
Tune TV to channel 3 or 4 (depending on how you set
the CH3/CH4 switch on the back of the receiver.
To receive off-air programming (no cable box):
1. Turn off satellite receiver.
2.
Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off satellite receiver.
2.
Tune TV to cable box output channel (usually CH2, CH3,
orCH4).
3.
Tune cable box to desired channel.
CAUTION
Do not stack electronic components
or other objects on top of the DSS
Receiver.
The
slots
on
top
of
the
receiver
must
be
left
uncovered
to
allow
proper
airflow
to
the
unit.
Blocking the airflow to the unit could
impair
performance
or
damage
your
receiver and other components.
Do not stack the DSS receiver on top
of a "hot component" such as an audio
power amplifier.
35