Panasonic Cx-dp88u - Manual (Page 12)

Troubleshooting
□ Helpful Hints
• The CD changer operates in a temperature range from 14“F {-10“C) to tSt^F (SS^C).
• Improper installation or driving on rough roads may cause the CD changer to skip while playing. This wilt not
damage the disc or the unit.
• Please read your Limited Warranty Card.
□ Maintenance
Your product is designed and manufactured to ensure a minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvent.
□ When Something Doesn’t Work
Check the charts on next page for possible causes and solutions to any problem you might be experiencing.
Some simple checks or minor adjustments may eliminate the problem.
□ Product Servicing
If you are in doubt about the check point, or if the remedies indicated on the chart don’t solve the problem,
refer to the enclosed directory of authorized Panasonic Servicenter.
□ Replacing the Fuse
Use fuses of the same specified rating (3 amps ). Using different substitutes or fuses with higher ratings, or
connecting the unit directly without a fuse, could cause fire or damage to the CD changer unit.
If the replacement fuse fails, contact your nearest Panasonic Servicenter for service.
□ Error Display Messages
Display
C i M
t
I LI L L
C I
L I
C J
L L
C J
L J
n n n n
u u u u
Description
Displays if more than 35 numbers are memorized.
This only applies when the CD/Cassette Receiver has a memory func­
tion.
Displays when the compact disc is dirty or when it is inverted. Next com­
pact disc is automatically selected.
Displays when the compact disc has a scratch on it. Next compact disc
is automatically selected.
Displays when the unit stops operating for some reason. Press the eject
button of changer unit.
Displays when there is no disc in the disc magazine.
• Numbers before El, E2 are error disc numbers.
• Display messages differ among CD/Cassette Receivers with a CD changer controller.
12
CX-DP88U