Dial [sound eq] to display manual, Press [3d al eq] to adjust the surround level, Adjust the sound quality – Panasonic SC-AK18 EN User Manual
Page 26: The sound quality wiffi the manual equalizer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

W)
C
■ i
1
2
q>
tc
c
3
I
*0
3
cr
"0
c
3
00jr Jtm
Mam
■■■
\u
■iv
■■■ ■»
■■I- >*#■
D C
m«« ■■■
-T^*l\'\\l
■Bx.\%V
.001.imm
---- ........................ ■ ■ ■
«■ •■■■
■■■•
mw9-
^m/i!
■ KVV\V
■»-
mm\
Ifj
00i.jmm
•aam
the sound quality wiffi the
manual equalizer___________________
Dial [SOUND EQ] to display MANUAL”.
When it is turned clockwise, the settings are selected in the
following sequence.
©HEAVY -
® CLEAR
® SOFT
® DISCO
®
LIVE
® HALL
© MANUAL
® Al EQ
@ FLAT ---------
Adjust the sound quality.
® <-------
>
direction:
For selecting the range of the sound to
be adjusted
Characteristics of each sound range
Under
too
Hz:
Around 330 Hz:
Around 1 kHz:
Around 3.3 kHz:
Above 10 kHz:
® 4- T
direction:
Super woofer range
Bass to midrange
Midrange
Midrange to trebie
Treble
For adjusting the level (7 steps)
When the level is in the center, the dot flashes rapidly.
Repeat steps ® and
®
to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQJ to display “FLAT’.
• The sound quality setting Is stored automatically. It is recalled
when “MANUAL” is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
Varying ffie sound quality
acoustK imoge (Al) equafi2
with the
tzer
The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound
quality coordinates to achieve subtle sound quality settings with ease.
Press [3D Al EQ] to adjust the surround level.
Every time you press the button;
3D Al 1
t
3D AI2
J
Al EQ (Light off)
Adjust the sound quality.
® <-----
i
direction:
SOFT-SHARP setting
@ 4- T
direction:
LIGHT-HEAVY setting
Repeat steps ® and @ to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
To release the equalizer
Dial [SOUND EQ] to display “FUT.
• The sound quality setting is stored automatically. It is recalled
when “Al EQ" is next selected.
• All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
RQT5258