Wu switch on the power, Press [clock/rimer] to select “clock, Press [clock/timer] to finish setting the time – Panasonic SC-AK18 EN User Manual
Page 11: To mute the volume o, Press [muting, Setting the time, Convenient functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the time
This is a 12-hour display clock.
This exampie in the figure shows how to set the tinne for 4:25 p.m.
WU Switch on the power
Press [CLOCK/riMER] to select “CLOCK”.
Every time you press the button:
CLOCK — ©PLAY — ©REC
t_ Previous display —I
(within 7 seconds or so)
Press [TUNE/riME ADJ (V) or (A)] to show the
present time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time when system Is ON
Press [CLOCK/TIMER] to select “CLOCK".
At ECO mode on, to display the time when system is OFF
Press [-DISP/-DEMO]. □
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
Convenient functions
Switching displays Q
Press [-DISP/-DEMO] to select the desired spectrum
analyzer.
Every time you press the button:
Normal
L_
Peak hold —Aurora—*Wiper
-------- (OFF) *---------------- i
To mute the volume O
by remote control only
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
Press the button again to cancel.
“MUTING" goes out.
Muting can also be canceled by lowering the volume all the
way (”dB).
When the system is fumed off, the muting operation will be automatically
canceled.
.r
£
o
BQ
RQT5258