Wu press [co, Press [cd manager] to select the desired mode, Press or [►►^►1] to select the desired – Panasonic SC-AK18 EN User Manual
Page 24: Press [• rec/stop] to start recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
c
■ i
I
0>
-C
8
&
Recording from compact discs
To record special CDs and tracks
(CD Manager function)
This function makes it easier for you to select special CDs and tracks
from amongst those loaded in the player.
• While recording, if a track is cut off in the middle at the end of the front
ade, it is re-recorded from the beginning, on the reverse side. Q
• At the end of the reverse side recording stops and the current
track will be Interrupted.
Before recording
Prepare the tape you want to use. Perform steps Q and B on page
23.
WU Press [CO].
Press [CD MANAGER] to select the desired mode.
Every time you press the button;
1-TRACK^ 1-DISC — 1-ALL
1
- NORMAL -----------1
(OFF)
1-TRACK; Only one particular track is recorded.
1-DISC;
The tracks on only one particular disc are recorded.
1-ALL;
The same track numbers on each of the CDs are
recorded in succession.
(NORMAL: The original display is restored in about 3 seconds.)
Press [(CD 1) - (CD 5)] to select the disc you want.
This step is not required if 1 -ALL was selected in step Q.
Press
or [►►^►1] to select the desired
track.
This step is not required if 1-DISC was selected in step Q.
Press [• REC/STOP] to start recording.
To stop recording
• To add a 4 second silent interval before stopping
Press
P].
The CD will stop automatically too.
• To stop recording without a silent interval
Press [• REC/STOP]. The CD will stop automatically too.
RQT5258