Specifications & information, General, Resetting hard disk recorder – Panasonic PV-HS1000 User Manual
Page 53: Screen burn in, Modem, Specifications and information, Specifications
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications & Information
Specifications
General
Operating voltage
Power Consumption
Tuner
MTS
Input Connectors
Tuner
Composite
Audio
S-Video
120VAC 60Hz
27W {Power On)
19W {Power Off)
Type F
Phono
X
2
Phono(L+R)X 2
4-pin miniature DIN
Resetting Hard Disk Recorder
If the Hard Disk Recorder does not respond
when you press buttons on the remote, press
and hold the POWER button on the front of
the unit for 10 seconds. The Hard Disk
Recorder will start up in a few moments.
The Hard Disk Recorder’s green power LED
does not need to be lighted to record shows.
If you have a cable box or a satellite receiver,
however, these device must remain on for the
Hard Disk Recorder to record from them.
Output Connectors
Composite
Audio
S-Video-
Telephone
Serial Control
IR Blaster
DimensionsA/Veight
Height
Width
Depth
Weight {net)
AudioA/ideo Signals
Audio output level
Video output level
Video output impedance
Phono X 2
Phono(L+R)X 2
4-pin miniature DIN
RJ-11,2wire
DB-9
76mm
430mm
290mm
5.9kg
2-OVp-p
1.0Vp-p
75 ohm
Ooeratina/Storaae Conditions
Operating temp, range +5°C to +40”C
Storage temp, range -20°C to +55°C for 100 hours
Screen Burn In
When any image is displayed on a television
screen for an extended period of time, a
permanent mark can remain even after the
image is changed. This is called “screen burn
in.” Projection TVs are the most susceptible to
screen burn in. To prevent this, don’t leave the
Channel Guide, or any other screen displayed
when you don’t need to use them. You can
also adjust the brightness of the Hard Disk
Recorder screens to help prevent this. See
“Change Display Brightness” on page 7.
To dismiss the Pause on-screen image from your TV
screen and keep a show paused, press the EXIT
button on the remote control.
^
Record
HDD Capacity
Video compression format
Audio compression format
Recording level
Recording time
MODEM
Speed
20.4GB
MPEG2
MPEG1 Iayer2
Extended/Medium/High
20.0H/10.0H/6.5H*
56kbps
Actual available recording time is not maximum because the
“Welcome Video” is already recorded in the Replay Guide.
To make the most of the available recording time, delete the
welcome video from the Replay Guide or save it to a
videotape.
53