Controlling live television, Before you begin, Viewing live television – Panasonic PV-HS1000 User Manual
Page 22: Press channel guide to display the channel guide, Press to select a current show, Browse preset channels, Select a channel by number button(s), Using instant replay
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Controlling Live Television
Before you begin...
You must have connected the Hard Disk Recorder to your
television and completed the on-screen setup.
Viewing Live Television
You use the Hard Disk Recorder remote control to watch television just
like you normally would using your television remote control.
Press TV, then press POWER to turn on
your television.
• See “Universal Remote Control” on page 42--44 if you
have not programmed the Hard Disk Recorder remote
control to operate your television.
2fPress HARD DISK RECORDER, then press
(
p o w e r
to turn on the Hard Disk Recorder.
Press CHANNEL GUIDE to display the
Channel Guide.
• You can also select
“Channel Guide’’
from the Main Menu.
Press
to select a current show
(light blue listing) in the Channel Guide, then
press SELECT.
N______________________________________________ ✓
Browse Preset Channels
Press
CHANNEL
+ (up) or
CHANNEL
- (down).
(Note; If the Hard Disk Recorder is currently recording a
show, you’ll need to stop the recordinq by pressing STOP on
the remote before browsing channels!)
Select a Channel by Number Button(s)
Press
Number Buttons
to select a channel
Switch Quickly between Two Channels
Press JUMP to switch to the last show you were
watching, and JUMP again to switch back to the first
show. This can also be between two pre-recorded
shows, and between a live show and a recorded show.
Get Information on a Show You’re Viewing
Press
DISPLAY
to get program information—a synopsis
of the current program youTe watching, and information
about the length of the show. Press
DISPLAY
again or
EXIT
to dismiss the information, or it will fade away in
15 seconds.
• Whenever you start watching a live show, the Hard Disk
Recorder automatically starts recordinq the show, and the
recording is temporarily preserved in the Hard Disk Recorder’s
recordinq space. Even if you delay viewing_^by using the pause
and rewind features, recording continues. Recording stops if
you change to a live or pre-recorded show.
Using Instant Replay
The Instant Replay feature lets you skip back
seven seconds during a live or recorded show.
It's the perfect way to ensure you don't miss a
single word of dialogue in your favorite movie, or
any of the important action in a game.
22