Panasonic OMNIVISION PV-8401 - Manual (Page 13)

[Case 1 )
1/ 4/2000 TUE 12:00«
DSTiON
SETTING : CH 02
AUTO CLOCK SET
COMPLETED
>4D ; PUSH CH UP KEY
If the displayed time is correct, press CH A to exit.
• This concludes one time VCR setup.
• See important note at the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the VCR
have recognized the PBS channel (setting channel) in
the wrong time zone. Please do the following to correct
the situation.
a Make a note of the SETTING:CH number shown on­
screen and press CH A to exit.
b Delete the setting channel from the VCR channel
memory. (See “To Add or Delete a Channel”
section on page 14.)
c Press ACTION to display the menu.
d Press AT to select “SET CLOCK,” and then
press ► to display the “SET CLOCK" screen.
e Press AT to select “AUTO CLOCK SET,” and then
press ► to display the “CLOCK AUTO SET” screen.
f Press CH A to start Clock Auto Set.
• If you use a cable box and have multiple PBS
stations, tune the cable box to a different PBS
station and try auto clock set using the menu.
ACTION
SELECT/SET
keys
■CHANNEL UP
(Case 2 )
AUTO CLOCK SET
(S INCOMPLETE
PUSH ACTION TO SET CLOCK
If the screen above appears, auto clock set is not
available in your area. Please set the clock
manually as described below.
a Press ACTION to display the
“SET CLOCK" screen.
b Press AT and ► to
select and set the month,
date, year, time, and
DST. (Daylight Saving Time).
— SET CLOCK
/|\
SELECTiA » KEY
SET :► KEY
END : ACT I ON KEY
See page 5 for
more on DST.
To Make Corrections,
repeatedly press ^ ► to move the cursor
to the incorrect entry and make the correction.
C Press ACTION twice to start
the clock and exit this mode.
----------- SET CLOCK —
1/ 4/2000 TUE 12:{
IMPORTANT NOTE FOR AUTO
CLOCK SET
• Auto clock set will be performed when
the VCR is turned off the first time
each day. If you use a cable box and
you want auto clock set to be
performed, the cable box must be left
on and tuned to the PBS channel
before the VCR power is turned off.
• If you use a DSS receiver, it must be
turned off for auto clock set.
• If you use AudioA/ideo Jack
connection between the VCR and
Cable Box or DSS receiver, you must
also connect the RF coaxial cable in
order to use the auto clock set and
channel auto set features.
SET :-4 ► KEY
START rACTI ON KEY
13