Setting the date and time 1 2, Press [start/copy/set, Setting your logo – Panasonic KX-F900 User Manual
Page 14: Note, Start/copy/set, Setting the date and time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the date, time, logo and facsimile
telephone number -
Before using your unit, program the correct date and time, your logo and your facsimile telephone
number
This information will be printed on the top of each page transmitted from your unit
To change the print position, see page 40
Press [MENU]
SYSTEM SET UP
Press then 0 \T]
Setting the date and time
1
2
3
4
SET DATE & TIME
Press [START/COPY/SET]
Enter the correct month/day/year/hour/minute
by selecting each 2 digits
Then press for AM or @ for PM
Example. Aug 10 1996,3 00PM
Press |T|0 00 00
00, then press 0 for PM
g Press [START/COPY/SET]
g
Press [MENU]
Setting your logo
Note
• If you make a mistake while programming,
press [STOP) then make corrections
•The accuracy of the clock will be
approximately ±60 seconds a month
Usually the logo is a company, division or personal name in an abbreviated form
1
2
3
4
5
6
14
Press [MENU]
SYSTEM SET UP
Dial keypad (MENU)
Press 0, then 0 0
YOUR LOGO
Press [START/COPY/SET]
LOGO=
Enter your logo up to 30 characters
• Refer to the instructions on page 15
Press [START/COPY/SET]
Press (MENU)
G3CDCD'
C
i
)CDCD!
CDCDCDi
CD CD ® j
CD CD CD CD
CDo
.Q_
CD O d5~
“O
[START/COPY/SET]