Installing your unit, Installing the recording paper – Panasonic KX-F900 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing your unit

Installing the recording paper

® Open the back lid by liHing up the tabs

located on both sides

Install a recording paper roll in the mam

unit

■ Make

sure that the shiny side of the

paper IS facing down and there is no
slack, tape, or glue residue on the paper

roll

correct incorrect

Insert the leading edge of the recording paper

between the recording paper roller and the
silver plate

Close the back lid by gently pressing down
on both ends

Note:

■

Only use the included roll of paper or specified recording paper, or else the print quality may be affected

and/or excessive thermal head wear may occur

■The beginning of some recording paper rolls are secured with glue or tape

Cut approximately 150 mm (6 inches) from the new roll of paper prior to installation

■

To order recording paper, see page B7