Panasonic KV-SS855D User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the Unit
6
Use the accessory roller cleaning
paper to wipe off the dirt on the
surfaces of the six rubber carrier
rollers and the five paper sensors.
7
Following the same procedure as
in step 4, use the accessory roller
cleaning paper to wipe the sur
faces of the Plastic carrier rollers
all the way around them proceed
ing from one end to the other in
the directions of the arrows
shown in the diagram to the right.
Plastic carrier roller
Wipe off in the arrow direction.
8
34
Install the paper feed roller mod
ule and retard roller module, then
close the front door. (See section
"Replacing the Roller Modules" on
page 37.)