Press the enter key, Setting the product id, Press the menu key until id" is displayed – Panasonic KV-SS855D User Manual
Page 13: Product, Use the ▼ key or ▲ key to select the desired unit, Isetting the counter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Display Panel Instructions
2
3
Use the ▼ key or ▲ key to select
"Enable" or "Disable".
Press the enter key.
• The return to the previous setting (in
step 1), press the esc key.
• Set the terminator to "Enable" when:
Connecting only one scanner to the
personal computer, or
Connecting other units and a scanner
(last) to the personal computer,
• The internal terminator in the scanner
will only work when the scanner
power is on.
If the internal terminator in the scan
ner is set to "Enable", be sure that the
scanner is turned on when using the
personal computer.
T
e
r m
i
n
a
t
0
r
?
E n a b
I
e
Setting the product ID
7
2
Press the menu key until
ID" is displayed.
'Product
Use the ▼ key or ▲ key to select
the desired unit.
• The ▲ key moves to the next setting
as shown below.
The ▼ key moves to the previous set
ting.
C
KV-SS855 — KV-SS25
........ ........^ KV-SS55EX
3
Press the enter key.
• To return to the previous setting (in
step 1), press the esc key.
P
r
o
d
u
c
t
1 D
K V
-
s
s
8 5
5
P
r
0
d
u
c
t
1 D
K V
-
S
s
2
5
ISetting the counter
You can set the counter to one of the following.
User Counter : The user can reset the counter.
Daily Counter : The counter will be reset to "0" at the end of the day. (0:00 am or 4:00 am)
System Counter: The total amount of scanned documents up to now will be displayed. If you would like to
change this setting, consult with your service dealer.
7
Press the menu key until "Set
Counter" is displayed.
S
e
t
C 0
u n
t
e
r
13